OTC 2017 May 1st – 4th (Booth#6455 Arena)

Solid Spot and CHEMIS Showcase New Fasteners and Custom Parts Solutions at OTC 2017 May 1st – 4th in Houston, Texas, USA.

Solid Spot and CHEMIS Showcase New Plastic Fasteners and Custom Parts Solutions to the Oil & Gas industry at the Offshore Technology Conference (OTC) 2017 at NRG Park Houston, Texas, USA from May 1st to May 4th 2017. Please stop by our booth #6455 (NRG Arena, Hall B).

OTC 2017

Consider the use of off-the-shelf corrosion resistant PEEK and RENY fasteners for composite downhole plugs, subsea applications, and for other parts. We offer quick delivery, inexpensive injection molded screws, bolts, washers, nuts, spacer and springs made from performance plastics. Drilling equipment is often exposed to HPHT and corrosive fluids. Tools used downhole require the highest levels of reliability and efficiency. Cutting edge fasteners made from PEEK and RENY plastics help reduce costs and down-time while providing noncorrosive solutions. Many applications which use stainless steel fasteners can be replaced by plastic fasteners to avoid corrosion. PEEK and RENY have very low moisture absorption rates and their physical properties show greater stability when compared to other polymers. We make our fasteners by injection molding which brings about significant cost reduction when compared to machining. We have molds for over 3000 different fasteners and all our products are in stock and ready to be shipped.

You can see our latest product offerings and discuss solutions to all your non-metallic fastener applications.  We have a huge selection of engineering plastic screws, washers, nuts, and springs and custom parts samples.   Representatives from Solid Spot and CHEMIS, and a subsea engineer will be at the booth.  Feel free to discuss any requirements or questions you may have for standard molded items or custom, built to order machined parts.

Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as plastic fastener injection molding specialist and mold manufacturer.  Chemis’ vast experience injection molding PEEK is apparent in the high quality and consistency of their screws, washers, springs, tie-bands, and nuts. Chemis has become the top supplier to medical equipment manufacturers, semiconductor equipment makers, electronics manufacturers and customers who insist on top quality polymer fasteners world-wide. CHEMIS is certified ISO 9001 and ISO 13485 (for some products). 

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the medical, semiconductor, LED, hard disk drive, aerospace and clean room industries. In 2012, Solid Spot became the exclusive master distributor for Chemis products in North America.   Online shopping is available for most PEEK items @ http://www.solidspot.com/shop/

Contact information:

Solid Spot LLC www.solidspot.com
Ted Weber (tedw@solidspot.com)
2464 El Camino Real #140, Santa Clara, CA 95051
Phone +1(408)821-7703

Nippon Chemical Screw, Co., Ltd  (CHEMIS) www.chemis.co.jp
International Sales Division
Yusuke Furukawa (furukawa@chemis.co.jp)
2-4-10 Kaminoge, Setagaya-ku, Tokyo 158-0093 Japan
Phone: 81-3-3703-1351

MD&M West 2017 February 7 – 9 CHEMIS Booth #530

Solid Spot and CHEMIS Showcase New Fasteners and Custom Parts Solutions at MD&M West 2017 February 7 – 9 in Anaheim, CA.

Tokyo, Japan  – Nippon Chemical Screw (CHEMIS)  a premier global provider of specialized polymer fasteners and custom injection molded solutions, will feature solutions for medical applications at Medical Design and Manufacturing (MD&M) West 2017 (Hall E, booth 530, downstairs by the stage) February 7 – 9, 2017 with the exclusive distributor Solid Spot.

Increasingly,  MRI and various medical equipment utilizing wireless signals require non-magnetic, low EMI/RFI materials. PEEK is well-known as “a radio transparent material” which does not produce electromagnetic or radio interference.  RENY is one of the strongest plastic fasteners available and can be used for replacement of metal/stainless screws for medical carts, IV polls, tables, test equipment, and in MRI applications.  This year, we will begin offering different grades of PEEK and RENY products.  Natural unfilled PEEK is the standard material used for many medical equipment applications.   But we are also offering injection molded 30% glass fiber reinforced (GF30) PEEK , Class VI PEEK, 30% Carbon filled (CF30) PEEK, Electric Static Discharge (ESD) grade PEEK and others.

You can see our latest product offerings and discuss solutions to all your non-metallic fastener applications.  We have a huge selection of engineering plastic screws, washers, nuts, and springs and custom parts samples.   Representatives from Solid Spot and CHEMIS will be at the booth.  Feel free to discuss any requirements or questions you may have for standard molded items or custom, built to order machined parts.

2017

Electronics West, Pacific Design & Manufacturing, Plastic West, ATX West, WestPack are held in the same exhibit center. Your MD&M West 2017 registration will get you into all of the shows. Please use our FREE registration link to attend MD&M West at www.MDMwest.com/invite, and use “invite” to receive 20% off for conference passes.

MD&M West is the largest medical design and manufacturing event in the world.  CHEMIS’ collection of high performance polymer fastening solutions help customers gain a competitive advantage by providing high quality injection molded parts (typically 4 – 6 times less costly than machined parts), with quick lead times. Solid Spot has a large PEEK fasteners inventory in their California office.  In stock items typically ship the same day the orders are placed and other items typically ship within one week.

Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as plastic fastener injection molding specialist and mold manufacturer.  Chemis’ vast experience injection molding PEEK is apparent in the high quality and consistency of their screws, washers, springs, tie-bands, and nuts. Chemis has become the top supplier to medical equipment manufacturers, semiconductor equipment makers, electronics manufacturers and customers who insist on top quality polymer fasteners world-wide. CHEMIS is certified ISO 9001 and ISO 13485 (for some products). 

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the medical, semiconductor, LED, hard disk drive, aerospace and clean room industries. In 2012, Solid Spot became the exclusive master distributor for Chemis products in North America.   Online shopping is available for most PEEK items @ http://www.solidspot.com/shop/

Contact information:

Solid Spot LLC www.solidspot.com
Ted Weber (tedw@solidspot.com)
2464 El Camino Real #140, Santa Clara, CA 95051
Phone +1(408)821-7703

Nippon Chemical Screw, Co., Ltd  (CHEMIS) http://www.chemis.co.jp
International Sales Division
Yusuke Furukawa (furukawa@chemis.com)
2-4-10 Kaminoge, Setagaya-ku, Tokyo 158-0093 Japan
Phone: 81-3-3703-1351

 

 

 

 

 

#2-56 & #10-24 PEEK screws are added to in-stock line-ups.

ANSI Lineup – Lower Price and same day shipping is available.

Tokyo Japan  – Nippon Chemical Screw (CHEMIS) has expanded their large selection of PEEK inch sizes.

Now, 1/4″, 5/16″, 3/8″ and 1/2″ length of #2-56 pan head Phillips screws are in stock at Solid Spot.

 Also, #10-24 pan head Phillips and socket head cap screws have been added to in-stock line-ups.

Typically, PEEK fasteners are individually made by a costly machining process and the lead time is around 2-4 weeks.  CHEMIS injection molds these fasteners, which leads to lower part costs and quicker lead times.  If the customer requires a different length, please ask and we can make them by machining.

All of our fasteners typically will ship within a day from Solid Spot’s inventory in Santa Clara, CA.   If an item is out of stock, they will  are typically ship within 3 to 7 days.  Out of stock orders received by Thursday 3pm PT will typically be shipped on following Monday from CA.

* Please click the chart below to see the price list.

AANSI-Lineup 07-2016

About:
Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as plastic fastener injection molding specialist and mold manufacturer.  Chemis’ vast experience injection molding PEEK is apparent in the high quality and consistency of their screws, washers, springs, tie-bands, and nuts. Chemis has become the top supplier to medical equipment manufacturers, semiconductor equipment makers, electronics manufacturers and customers who insist on top quality polymer fasteners world-wide.

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the medical, semiconductor, LED, hard disk drive, aerospace and clean room industries. In 2012, Solid Spot became the exclusive master distributor for Chemis products in North America.   Online shopping is available for most PEEK items @ http://www.solidspot.com/shop/

Contact information:

Solid Spot LLC www.solidspot.com
Ted Weber (tedw@solidspot.com)
2464 El Camino Real #140, Santa Clara, CA 95051
Phone +1(408)821-7703

Nippon Chemical Screw, Co., Ltd  (CHEMIS) http://www.chemis.co.jp/eng
International Sales Division
Yusuke Furukawa (furukawa@chemis.com)
2-4-10 Kaminoge, Setagaya-ku, Tokyo 158-0093 Japan
Phone: 81-3-3703-1351

 

 

MD&M West 2016 February 9 – 11 CHEMIS Booth #536

Solid Spot and CHEMIS Showcase New Fasteners and Custom Parts Solutions at MD&M West 2016 February 9 – 11 in Anaheim, CA.

Tokyo, Japan  – Nippon Chemical Screw (CHEMIS)  a premier global provider of specialized polymer fasteners and custom injection molded solutions, will feature solutions for medical applications at Medical Design and Manufacturing (MD&M) West 2016 (Hall E, booth 536, downstairs by the stage) February 9 – 11, 2016 with the exclusive distributor Solid Spot.

Booth #536

You can see our latest product offerings and discuss solutions to unique and complex fastener applications.  We have a huge selection of engineering plastic screws, washers, nuts, and springs and custom parts samples.   Representatives from Solid Spot, CHEMIS and Daicel-Evonik will be at the booth.  Feel free to discuss any requirements or questions you may have for standard molded items or custom built to order machined parts.

MD&M West will be co-located with several shows including the AeroCon West 2016 which focuses on the Aerospace industry, and Electronics West 2016. Your MD&M West 2016 registration will get you into all of the shows.

Please use our FREE registration link to attend MD&M West, AeroCon West & Electronics West (a $95 value) at www.MDMwest.com/invite and specify Source Code “invite

With over 27 years experience in molding PEEK, CHEMIS is providing solutions to the aerospace industry and developing new partnerships addressing concerns for weight reduction and specification compliance.   

CHEMIS’ collection of high performance polymer fastening solutions help customers gain a competitive advantage by providing high performance technology materials with quick lead times. The latest solutions include PEEK and RENY micro screws, White PEEK cable ties, and a huge variety of PC, POM and PEEK springs.  CHEMIS is currently co-developing solutions with polymer experts at Daicel-Evonik for implantable PEEK and is working on preparations for ISO 13485 and AS9001.

“We’ve seen huge growth in demand from medical equipment manufacturers looking for quick delivery off-the-shelf molded fasteners, not only for MRI related applications but many applications where high performance polymer fasteners are required,”  said Yusuke Furukawa, Sales Manager at CHEMIS.  “MD&M West represents an excellent opportunity for us to help our customers explore ways to differentiate from the competition and grow their business.”

In North America, Solid Spot is the Master Distributor of CHEMIS and will join CHEMIS at the show to discuss any questions or comments customers may have.
Solid Spot has a large PEEK fasteners inventory in their California office. In stock items typically ship the same day the orders are placed and other items typically ship within one week.

Access to Co-Located Events

If you attend MD&M your badge gets you access to the largest co-located event on the West coast enabling you to stay up to date on the latest technologies and trends with over 2,200+ suppliers.

md&m

aerocon

electronics

plastic design plastecatx pack

 

 

 

About:
Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as plastic fastener injection molding specialist and mold manufacturer.  Chemis’ vast experience injection molding PEEK is apparent in the high quality and consistency of their screws, washers, springs, tie-bands, and nuts. Chemis has become the top supplier to medical equipment manufacturers, semiconductor equipment makers, electronics manufacturers and customers who insist on top quality polymer fasteners world-wide.

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the medical, semiconductor, LED, hard disk drive, aerospace and clean room industries. In 2012, Solid Spot became the exclusive master distributor for Chemis products in North America.   Online shopping is available for most PEEK items @ http://www.solidspot.com/shop/

Contact information:

Solid Spot LLC www.solidspot.com
Ted Weber (tedw@solidspot.com)
2464 El Camino Real #140, Santa Clara, CA 95051
Phone +1(408)821-7703

Nippon Chemical Screw, Co., Ltd  (CHEMIS) http://www.chemis.co.jp/eng
International Sales Division
Yusuke Furukawa (furukawa@chemis.com)
2-4-10 Kaminoge, Setagaya-ku, Tokyo 158-0093 Japan
Phone: 81-3-3703-1351

#2-56 PEEK screws added as a standard in-stock item.

Image

Lower Price and same day shipping is available.

Tokyo Japan  – Nippon Chemical Screw (CHEMIS) has expanded their large selection of PEEK inch sizes.

Now #2-56 x 1/4″ ($34/100pcs) and #2-56 x 3/8” ($36/100pcs) pan head Phillips screws are in stock at Solid Spot, and several lengths of #10-24 pan head Phillips and socket head cap screws will be released in January 2016.

Typically, PEEK fasteners are individually made by a costly machining process and the lead time is around 2-4 weeks.  CHEMIS injection molds these fasteners, which leads to lower part costs and quicker lead times.  If the customer requires a different length, please ask and we can make them by machining.

All of our fasteners typically will ship within a day from Solid Spot’s inventory in Santa Clara, CA.   If an item is out of stock, they will  are typically ship within 3 to 7 days.  Out of stock orders received by Thursday 3pm PT will typically be shipped on following Monday from CA.

* Please click the chart below to see the price list.ANSI Lineup

About:
Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as plastic fastener injection molding specialist and mold manufacturer.  Chemis’ vast experience injection molding PEEK is apparent in the high quality and consistency of their screws, washers, springs, tie-bands, and nuts. Chemis has become the top supplier to medical equipment manufacturers, semiconductor equipment makers, electronics manufacturers and customers who insist on top quality polymer fasteners world-wide.

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the medical, semiconductor, LED, hard disk drive, aerospace and clean room industries. In 2012, Solid Spot became the exclusive master distributor for Chemis products in North America.   Online shopping is available for most PEEK items @ http://www.solidspot.com/shop/

Contact information:

Solid Spot LLC www.solidspot.com
Ted Weber (tedw@solidspot.com)
2464 El Camino Real #140, Santa Clara, CA 95051
Phone +1(408)821-7703

Nippon Chemical Screw, Co., Ltd  (CHEMIS) http://www.chemis.co.jp/eng
International Sales Division
Yusuke Furukawa (furukawa@chemis.com)
2-4-10 Kaminoge, Setagaya-ku, Tokyo 158-0093 Japan
Phone: 81-3-3703-1351

MD&M West 2016 February 9 – 11 CHEMIS Booth #536

Solid Spot and CHEMIS Showcase New Fasteners and Custom Parts Solutions at MD&M West 2016 February 9 – 11 in Anaheim, CA.

Tokyo, Japan  – Nippon Chemical Screw (CHEMIS)  a premier global provider of specialized polymer fasteners and custom injection molded solutions, will feature solutions for medical applications at Medical Design and Manufacturing (MD&M) West 2016 (Hall E, booth 536, downstairs by the stage) February 9 – 11, 2016 with the exclusive distributor Solid Spot.

Booth #536

 

You can see our latest product offerings and discuss solutions to unique and complex fastener applications.  We have a huge selection of engineering plastic screws, washers, nuts, and springs and custom parts samples.   Representatives from Solid Spot, CHEMIS and Daicel-Evonik will be at the booth.  Feel free to discuss any requirements or questions you may have for standard molded items or custom built to order machined parts.

MD&M West will be co-located with several shows including the AeroCon West 2016 which focuses on the Aerospace industry, and Electronics West 2016. Your MD&M West 2016 registration will get you into all of the shows.

Please use our FREE registration link to attend MD&M West, AeroCon West & Electronics West (a $95 value) at www.MDMwest.com/invite and specify Source Code “invite

With over 27 years experience in molding PEEK, CHEMIS is providing solutions to the aerospace industry and developing new partnerships addressing concerns for weight reduction and specification compliance.   

CHEMIS’ collection of high performance polymer fastening solutions help customers gain a competitive advantage by providing high performance technology materials with quick lead times. The latest solutions include PEEK and RENY micro screws, White PEEK cable ties, and a huge variety of PC, POM and PEEK springs.  CHEMIS is currently co-developing solutions with polymer experts at Daicel-Evonik for implantable PEEK and is working on preparations for ISO 13485 and AS9001.

“We’ve seen huge growth in demand from medical equipment manufacturers looking for quick delivery off-the-shelf molded fasteners, not only for MRI related applications but many applications where high performance polymer fasteners are required,”  said Yusuke Furukawa, Sales Manager at CHEMIS.  “MD&M West represents an excellent opportunity for us to help our customers explore ways to differentiate from the competition and grow their business.”

In North America, Solid Spot is the Master Distributor of CHEMIS and will join CHEMIS at the show to discuss any questions or comments customers may have.
Solid Spot has a large PEEK fasteners inventory in their California office. In stock items typically ship the same day the orders are placed and other items typically ship within one week.

Access to Co-Located Events

If you attend MD&M your badge gets you access to the largest co-located event on the West coast enabling you to stay up to date on the latest technologies and trends with over 2,200+ suppliers.

md&m

aerocon

electronics

 

plastic design plastecatx pack

 

 

 

 

About:
Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as plastic fastener injection molding specialist and mold manufacturer.  Chemis’ vast experience injection molding PEEK is apparent in the high quality and consistency of their screws, washers, springs, tie-bands, and nuts. Chemis has become the top supplier to medical equipment manufacturers, semiconductor equipment makers, electronics manufacturers and customers who insist on top quality polymer fasteners world-wide.

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the medical, semiconductor, LED, hard disk drive, aerospace and clean room industries. In 2012, Solid Spot became the exclusive master distributor for Chemis products in North America.   Online shopping is available for most PEEK items @ http://www.solidspot.com/shop/

 

Contact information:

Solid Spot LLC www.solidspot.com
Ted Weber (tedw@solidspot.com)
2464 El Camino Real #140, Santa Clara, CA 95051
Phone +1(408)821-7703

Nippon Chemical Screw, Co., Ltd  (CHEMIS) http://www.chemis.co.jp/eng
International Sales Division
Yusuke Furukawa (furukawa@chemis.com)
2-4-10 Kaminoge, Setagaya-ku, Tokyo 158-0093 Japan
Phone: 81-3-3703-1351

 

ANSI Standard Inch PEEK Fasteners Now Available with Lower Price and 1 – 7 days Lead Time

Solid Spot LLC, master distributor of Nippon Chemical Screw, aka “CHEMIS” releases a new line up of ANSI inch standard PEEK fasteners including #4-40, #6-32, #8-32, #10-32 and ¼ – 20.  ANSI-Flat-HeadCurrent head styles available include Pan head Phillips, Hexagon socket cap, and Flat head Slotted.

Typically, PEEK fasteners are individually made by a costly machining process and the lead time is around 4 weeks.  Chemis injection molds these fasteners, which leads to lower part costs and quicker lead times.  

 

These fasteners typically will ship within a day from Solid Spot’s inventory in Santa Clara, CA or lead time for out of stock items are typically 3 to 7 days.  Order comes by Thursday 3pm PT will be shipped on following Monday from CA.

* Click the chart below to see the price list

Pan-HeadSocket-HeadFlat-Head

 

 

 

 

 

Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as a mold manufacturer and plastic fastener injection molding specialist.  Chemis is the largest plastic fastener supplier in Japan and have been manufacturing PEEK fasteners for over 25 years.

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the semiconductor, LED, military, hard disk drive, medical, and fastener industries.

Contact information:
Solid Spot LLC www.solidspot.com
Ted Weber (tedw@solidspot.com)
2464 El Camino Real #140, Santa Clara, CA 95051
Phone +1(408)821-7703

Nippon Chemical Screw (Chemis) http://www.chemis.co.jp/eng
International Sales Division
Yusuke Furukawa (furukawa@chemis.com)
2-4-10 Kaminoge, Setagaya-ku, Tokyo 158-0093 Japan
Phone: 81-3-3703-1351

 

 

 

Chemis To Exhibit at the upcoming 2013 National Industrial Fastener & Mill Supply Expo

We would like to extend an invitation to everyone to visit us at the upcoming 2013 National Industrial Fastener & Mill Supply Expo in Las Vegas. The exhibits will be open to the public October 24 and 25th at the Sands Expo. Chemis will be joined  by Solid Spot, who is the master distributor in the USA.  We are looking for fastener distributors who would like to increase their product line up with high quality metric and inch fasteners from the largest plastic fastener supplier in Japan.

Please stop by our booth #1322 and let’s talk about any plastic fastener requirements or questions you may have.  You can see our latest product offerings and discuss solutions to unique and complex  fastener applications.  The National Industrial Fastener & Mill Supply Expo is the largest event of its kind in North America. The Expo features industrial fasteners; fastener machinery and tooling; inspection, testing and packaging equipment; abrasives; cutting tools; drills; hand tools; plant and safety supplies; and hundreds of other industrial products and services. Click the following link for more show information http://www.fastenershows.com/

Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as a mold manufacturer and plastic fastener injection molding specialist.  Chemis is the largest plastic fastener supplier in Japan and have been manufacturing PEEK fasteners for over 25 years.

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the semiconductor, LED, military, hard disk drive, medical, and fastener industries.

Contact information:
Solid Spot LLC www.solidspot.com
Ted Weber (tedw@solidspot.com)
2464 El Camino Real #140, Santa Clara, CA 95051
Phone +1(408)821-7703

Nippon Chemical Screw (Chemis) http://www.chemis.co.jp/eng
International Sales Division
Yusuke Furukawa (furukawa@chemis.com)
2-4-10 Kaminoge, Setagaya-ku, Tokyo 158-0093 Japan
Phone: 81-3-3703-1351

New Array of PEEK Micro-Screws Now Available

01/04/2013 Santa Clara, CA

Solid Spot LLC, exclusive North American Distributor for Nippon Chemical Screw (aka “CHEMIS”), announces the availability of a new array of plastic micro-screws to fill an important void in size availability.  Chemis’ know-how and expertise in molding PEEK over the past 25 years enables them to mold these tiny PEEK Pan Head Phillips screws in M1.2, M1.4, and M1.6 sizes with both 2.5 mm and 4 mm lengths.  

Until now, manufacturers who use micro-screws have been limited to using metal micro-screws.  The new Chemis PEEK micro-screws provide benefits including electrical isolation, corrosion resistance, non-magnetic, thermal isolation, and light weight.  PEEK fasteners are widely used in the semiconductor, medical, metrology, oil and gas, aerospace and numerous other industries due to their strength,   chemical resistance, and electrically isolating properties.  With over 400 existing molds for PEEK fasteners alone, injection molded PEEK fastener can be procured with a short lead and lower costs than machining.

 A link to technical information on PEEK micro-screws and/or online ordering can be found at http://www.solidspot.com/peek_pan_head_micro_screws.html

 Chemis is the largest molder of PEEK, PDVF, reinforced Nylon and other super-engineering plastic fasteners in Japan and has a huge inventory of fasteners in metric and ANSI standard sizes.    Solid Spot LLC in Santa Clara, CA is stocking Chemis PEEK screws and other plastic fasteners making same-day delivery possible to customers in North America.

 Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the semiconductor, LED, hard disk drive, medical and infection control.  In 2012 Solid Spot became the exclusive distributor of Chemis products in North America and sells to distributors and end users.

 Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as a mold manufacturer and plastic fastener injection molding specialist.  They are the largest plastic fastener supplier in Japan and have been manufacturing PEEK fasteners for over 25 years.

Contact information:
Solid Spot LLC
Ted Weber
tedw@solidspot.com
2464 El Camino Real STE140
Santa Clara, CA 95051 U.S.A.
Tel: +1(408)821-7703 (direct)
www.solidspot.com

Nippon Chemical Screw &Co., Ltd
Yusuke Furukawa
International Sales Division
furukawa@chemis.co.jp
2-4-10, Kaminoge, Setagaya-ku
Tokyo 158-0093 Japan
Tel: +81-3-3703-1351
http://www.chemis.co.jp/corp/detailseng?id=1122

Fastener Distribution Agreement Enables Quick Delivery of PEEK Fasteners

 

10/2/2012 Santa Clara, CA

Solid Spot LLC has signed an exclusive distribution agreement with Nippon Chemical Screw & Co., Ltd aka “CHEMIS”.

Chemis is the largest plastic fastener supplier in Japan and have been manufacturing PEEK fasteners for over 25 years. To meet the increasing demand for rapid delivery of PEEK fasteners and well as other polymer fasteners, Chemis‘ huge inventory will now be available with same day delivery for in stock items, and no more than one week for those few items not in stock at Solid Spot.

Chemis Representative Director Hanji Fumio & Solid Spot CEO Ted Weber

PEEK fasteners are key components used in the semiconductor, medical, metrology, oil & gas, aerospace and numerous industries due to their strength, light-weight, corrosion resistance, electric and thermal insulation and non-magnetic properties.  Chemis is the largest molder of PEEK, PVDF, reinforced Nylon and other super-engineering plastic fasteners in Japan and the widest range of metric and ANSI standard sizes available.  With over 400 existing molds for PEEK fasteners alone, short lead times and lower costs are now a reality.

Nippon Chemical Screw, Co., Ltd  (Chemis) was established in 1965 as plastic fastener injection molding specialist and mold manufacturer.  Chemis’ vast experience injection molding PEEK is apparent in the high quality and consistency of their screws, washers, springs, tie-bands, and nuts. Chemis has become the top supplier to semiconductor equipment makers, electronics manufacturers and customers who insist on top quality polymer fasteners world-wide.

Solid Spot LLC was established in 2002 as a distributor and sales agent for technical products used in the semiconductor, LED, hard disk drive, clean rooms and  medical.  Online shopping is available for most PEEK items @ http://www.solidspot.com/shop/

Contact information:
Solid Spot LLC
Ted Weber
tedw@solidspot.com
2464 El Camino Real STE140
Santa Clara, CA 95051 U.S.A.
Tel: +1(408)821-7703 (direct)
www.solidspot.com

Nippon Chemical Screw &Co., Ltd
Yusuke Furukawa
International Sales Division
furukawa@chemis.co.jp
2-4-10, Kaminoge, Setagaya-ku
Tokyo 158-0093 Japan
Tel: +81-3-3703-1351
http://www.chemis.co.jp/en